LIS3MDL Breakout Board

$11.32

En stock

LIS3MDL Breakout Board - three-axis magnetic sensor

0886Z02

LIS3MDL Breakout Board - three-axis magnetic sensor

The LIS3MDL is an ultra-low-power high-performance three-axis magnetic sensor.

The LIS3MDL has user-selectable full scales of ±4/±8/±12/±16 gauss.

The self-test capability allows the user to check the functioning of the sensor in the final application.

The device may be configured to generate interrupt signals for magnetic field detection.

The LIS3MDL includes an I2C serial bus interface that supports standard and fast mode (100 kHz and 400 kHz) and SPI serial standard interface.

The LIS3MDL is available in a small thin plastic land grid array package (LGA) and is guaranteed to operate over an extended temperature range of -40 °C to +85 °C.

LIS3MDL sensor Key Features :

  • Wide supply voltage, 1.9 V to 3.6 V
  • Independent IO supply (1.8 V)
  • ±4/±8/±12/±16 gauss selectable magnetic full scales
  • Continuous and single-conversion modes
  • 16-bit data output
  • Interrupt generator
  • Self-test
  • I2C/SPI digital output interface
  • Power-down mode / low-power mode
  • ECOPACK®, RoHS and “Green” compliant

LIS3MDL Breakout Board Features :

  • Dimensions : 17.1mm x 17.6mm x 6mm (L x l x H)
  • Weight : <1g
  • Outputs : JST-GH 4pins standard I2C dronecode (wire not included)

                        Solder pins connector refer to sensor datasheet (link below)

  • Natively compatible with PX4 / Ardupilot flight stacks

Links :

> Sensor Datasheet

> https://github.com/pololu/lis3mdl-arduino

> https://github.com/stm32duino/LIS3MDL

Recommended wire : 

> JST-GH 4pins to JST-GH 4pins

> JST-GH 4pins to JWT 4pins

Donnez votre avis

LIS3MDL Breakout Board

LIS3MDL Breakout Board

LIS3MDL Breakout Board - three-axis magnetic sensor

Quantité Remise Vous économisez
5 5% Jusqu'à $2.83
20 10% Jusqu'à $22.63
100 15% Jusqu'à $169.74
250 20% Jusqu'à $565.80

Produits similaires